Cleaning The Print Head Deeply - Canon MX470 series Online Manual

Hide thumbs Also See for MX470 series:
Table of Contents

Advertisement

Cleaning the Print Head Deeply

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean
the print head deeply only when necessary.
1. Make sure that the power is turned on.
2. Clean the print head deeply.
1. Press the Setup button.
The Setup menu screen will appear.
2. Use the
LCD and Operation Panel
3. Use the
The machine starts cleaning the print head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the print head. This
takes about 1 to 2 minutes.
3. Check the print head condition.
To check the print head condition,
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours. Do
not unplug the power cord when turning off the power.
If the problem is still not resolved,
If the problem is still not resolved after replacing the FINE cartridge, contact the service center.
or
button to select Maintenance, then press the OK button.
or
button to select Deep cleaning, then press the OK button.
print the nozzle check
replace the FINE cartridge
pattern.
with a new one.
117

Advertisement

Table of Contents
loading

Table of Contents