Rejecting Fax Reception - Canon 3300B002 On-Screen Manual

Rejecting Fax Reception

> >
Advanced Guide Faxing Sending/Receiving Faxes Using the Operation Panel of the Machine
Reception
Rejecting Fax Reception
You can set the machine to reject faxes with no sender information or those from specific senders.
Select one of the following conditions to reject faxes.
Faxes with no caller identification.
Faxes from senders not registered to the one-touch speed dial codes
(MX860 series) or the coded speed dial codes.
Faxes from senders registered in the machine as rejected numbers.
1.
FAX button, then press the
Press the
The FAX menu screen is displayed.
2.
Use the button to select
3.
button to select
Use the
4.
Use the button to select FAX settings, then press the
5.
Use the button to select Reception settings, then press the OK button.
6.
Use the button to select Fax reception reject, then press the OK button.
7.
Use the button to select ON, then press the
8.
Use the button to select the fax rejection condition, then press the
You can select one of the three conditions below.
button.
Menu
Settings, then press the OK button.
Device settings, then press the OK button.
button.
OK
Page 623 of 853 pages
> Rejecting Fax
button.
OK
button.
OK