Printing The Nozzle Check Pattern - Canon 3300B002 On-Screen Manual

Printing the Nozzle Check Pattern

> Routine Maintenance
Contents
Pattern
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the
FINE Cartridge whose ink is low.
Replacing a FINE Cartridge
See
You need to prepare: a sheet of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on.
Operation Panel .
See
2.
Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in
the Rear Tray.
3.
Open the Paper Output Tray gently.
4.
Print the nozzle check pattern.
Press the Menu button.
(1)
Use the (Left) or
(2)
button.
The Settings screen will appear.
Use the (Left) or
(3)
button.
OK
The Maintenance screen will appear.
Use the (Up) or
(4)
button.
The pattern print confirmation screen will appear.
Use the (Up) or
(5)
The nozzle check pattern will be printed and two pattern confirmation screens will appear alternately.
5.
Examine the nozzle check pattern.
Examining the Nozzle Check Pattern
See
>
When Printing Becomes Faint or Colors Are Incorrect
.
(Right) button to select Settings
(Right) button to select Maintenance
(Down) button to select Nozzle check, and press the OK
(Down) button to select Yes, and press the
.
Advanced Guide Troubleshooting
> Printing the Nozzle Check
, and press the OK
, and press the
button.
OK
Page 110 of 853 pages