Advanced Settings; Quiet Mode - Canon 3300B002 On-Screen Manual

Advanced settings

> Changing the Machine Settings
Advanced Guide
Advanced settings
Volume control
Selects the volume.
Keypad volume
Selects the beep volume when pressing the buttons on the Operation Panel.
Alarm volume
Selects the alarm volume.
Country select
Selects the country where you are using the machine.
Note
This setting may not be available depending on the country or region of purchase.

Quiet mode

Enables this function on the machine if you want to reduce the operating noise, such as when
printing at night.
Enabling this function reduces the noises generated in the following cases:
Copying
Printing from a PictBridge compliant device
Printing from a wireless communication device
Receiving the fax
Sending the fax
Printing a template form
Important
Operating speed may be reduced compared to when this setting is set to OFF.
This function may not be so effective depending on the machine's setting.
Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced.
Note
The noises generated while scanning or printing from the computer can also be reduced. To
reduce these noises, you need to configure the settings on the computer.
For the noises while scanning, refer to
For the noises while printing from the computer, refer to
Key repeat
Enables/Disables continuous input by pressing and holding down the
when setting the number of copies, the zoom ratio, etc.
> Changing the Machine Settings on the LCD
.
Scanner Tab
Reducing the Machine Noise
Page 721 of 853 pages
> Advanced settings
.
, , , or
button
Page top