Adjusting Histogram - Canon 3300B002 On-Screen Manual

Adjusting Histogram

>
Advanced Guide Scanning
ScanGear (Scanner Driver) > Adjusting Histogram
Adjusting Histogram
In ScanGear's Advanced Mode tab, click
Note
Click Defaults to reset all adjustments in the current window.
Channel
Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation). These
colors can be adjusted individually as a "channel."
Master
Adjust the Red, Green and Blue combined.
Red
Adjust the Red channel.
Green
Adjust the Green channel.
Blue
Adjust the Blue channel.
Note
Only Grayscale will be displayed in Channel when Color Mode is Grayscale.
Reading Histograms
You can open Histogram of a specified area for each Channel. The higher the Histogram peak, the more
data is distributed to that level.
>
Scanning with Other Application Software
(Histogram).
>
Correcting Images and Adjusting Colors with
Page 540 of 853 pages