Using The Caller Id Service To Reject Calls - Canon 3300B002 On-Screen Manual

Using the Caller ID Service to Reject Calls

> >
Advanced Guide Faxing Sending/Receiving Faxes Using the Operation Panel of the Machine
Service to Reject Calls
Using the Caller ID Service to Reject Calls
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID
does not match the conditions specified in this setting, the machine rejects the phone call or fax
reception from the sender.
1.
FAX button, then press the
Press the
The FAX menu screen is displayed.
2.
Use the button to select
3.
Use the button to select
4.
Use the button to select FAX settings, then press the
5.
Use the button to select Reception settings, then press the OK button.
6.
Use the button to select Caller rejection, then press the
7.
Use the button to select Yes, then press the OK button.
You can now perform settings for Caller rejection.
8.
Use the button to select the phone call or fax rejection condition, use the
button to select the setting, then press the OK button.
Set the conditions below.
Anonymous no.
Selects whether to reject a phone call or fax reception from a sender with no caller identification.
Out of area
Selects whether to reject a phone call or fax reception out of the subscribed service area.
Rejected numbers
button.
Menu
Settings, then press the OK button.
Device settings, then press the OK button.
Page 626 of 853 pages
> Using the Caller ID
button.
OK
button.
OK