Canon 3300B002 On-Screen Manual page 16

How to Navigate Menus on the LCD
Image optimizer
Layout
Bluetooth settings
Device name
Access refusal
Security
Passkey
PictBridge settings: See
Language selection: See
Reset setting: See
Telephone no. only
Setting only
Reset both
*1
May not appear depending on the country or region of purchase.
*2
Appears only when the optional Bluetooth unit is attached to the machine.
Select template screen (See
Basic Operation on the Settings Screen
You can change the settings in each mode by pressing the Settings button, when printing in the copy
mode or fax mode or when saving scanned data on a USB flash drive in the scan mode.
You can change the print settings such as page size, media type, etc.
This section describes the procedure to change the settings, taking the procedure to specify
4"x6"(10x15cm) for the page size in the copy mode as an example.
When printing from a computer, see
Note
To change the settings when printing from a PictBridge compliant device or wireless communication
device, refer to the on-screen manual:
1.
Display the settings screen.
Press the COPY button to switch to the copy mode.
(1)
Press the Settings button.
(2)
The Copy settings screen will appear.
2.
Select the settings tab.
Use the (Left) or
(1)
Example: Select Settings Tab 1 here.
*2 .
: See Bluetooth settings
PictBridge settings .
Language selection .
.
Reset setting
Printing the Notebook or Graph Paper
Printing from Your Computer
Advanced Guide
(Right) button to select the settings tab.
)
.
.
Page 16 of 853 pages