Verifying Enhanced Zone Information; Compacting The Zone Database; Zone And Zone Set Analysis - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Compacting the Zone Database

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

Verifying Enhanced Zone Information

The following example shows how to display the zone status for a specified VSAN:
switch# show zone status vsan 2
Compacting the Zone Database
You can delete excess zones and compact the zone database for the VSAN.
Note A merge failure occurs when a switch supports more than 2000 zones per VSAN but its neighbor does
not. Also, zone set activation can fail if the switch has more than 2000 zones per VSAN and not all
switches in the fabric support more than 2000 zones per VSAN.
To delete zones and compact the zone database for a VSAN, perform this task:
Command
Step 1
switch# configuration terminal
Step 2
switch(config)# no zone name zone-name
vsan vsan-id
Step 3
switch(config)# zone compact vsan
vsan-id

Zone and Zone Set Analysis

To better manage the zones and zone sets on your switch, you can display zone and zone set information
using the show zone analysis command.
The following example shows how to display full zoning analysis:
switch# show zone analysis vsan 1
The following example shows how to display active zoning analysis:
switch# show zone analysis active vsan 1
See the Cisco Nexus 5000 Series Switch Command Reference for the description of the information
displayed in the command output.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
38-24
Chapter 38
Purpose
Enters configuration mode.
Deletes a zone to reduce the number of zones to 2000
or fewer.
Compacts the zone database for the specified VSAN
to recover the zone ID released when a zone was
deleted.
Configuring and Managing Zones
OL-16597-01