Troubleshooting Fibre Channel; Fctrace - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Troubleshooting Fibre Channel

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
To perform the fctrace operation, perform one of these tasks:
Command
switch# fctrace fcid 0xd70000 vsan 1
Route present for :
20:00:00:0b:46:00:02:82(0xfffcd5)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
switch# fctrace pwwn 21:00:00:e0:8b:06:d9:1d vsan 1
timeout 5
Route present for : 21:00:00:e0:8b:06:d9:1d
20:00:00:0b:46:00:02:82(0xfffcd5)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
Timestamp Invalid.
20:00:00:05:30:00:18:db(0xfffcd7)
switch# fctrace device-alias disk1 v 1
Route present for : 22:00:00:0c:50:02:ce:f8
20:00:00:05:30:00:31:1e(0xfffca9)
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
50-6
0xd70000
Chapter 50
Purpose
Invokes fctrace for the specified FC ID of
the destination N port.
Invokes fctrace using the pWWN of the
destination N port.
By default the period to wait before
timing out is 5 seconds, The range is from
one through 10 seconds.
Invokes fctrace using the device alias of
the destination N port.
Troubleshooting
OL-16597-01