Information About Scsi Lun Discovery; About Starting Scsi Lun Discovery - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Discovering SCSI Targets
This chapter describes the SCSI LUN discovery feature provided in switches in the Cisco Nexus 5000
Series. It includes the following sections:
•
•

Information About SCSI LUN Discovery

Small Computer System Interface (SCSI) targets include disks, tapes, and other storage devices. These
targets do not register logical unit numbers (LUNs) with the name server.
The name server requires LUN information for the following reasons:
•
•
•
The SCSI LUN discovery feature uses the local domain controller Fibre Channel address. It uses the
local domain controller as the source FC ID, and performs SCSI INQUIRY, REPORT LUNS, and READ
CAPACITY commands on SCSI devices.
The SCSI LUN discovery feature is initiated on demand, through CLI or SNMP. This information is also
synchronized with neighboring switches, if those switches belong to the Cisco Nexus 5000 Series.
This section includes the following topics:
•
•
•
•

About Starting SCSI LUN Discovery

SCSI LUN discovery is done on demand.
Only Nx ports that are present in the name server database and that are registered as FC4 Type =
SCSI_FCP are discovered.
OL-16597-01
Information About SCSI LUN Discovery, page 42-1
Displaying SCSI LUN Information, page 42-3
To display LUN storage device information so that a Network Management System (NMS) can
access this information.
To report device capacity, serial number, and device ID information.
To register the initiator and target features with the name server.
About Starting SCSI LUN Discovery, page 42-1
Starting SCSI LUN Discovery, page 42-2
About Initiating Customized Discovery, page 42-2
Initiating Customized Discovery, page 42-2
C H A P T E R
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
42
42-1