Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 610

Cisco nexus 5000 series switch cli software configuration guide, nx-os 4.0(1a)n1 (ol-16597-01, january 2009)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Sample Configuration
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
To configure the authentication setup shown in
Step 1
Obtain the device name of the Cisco Nexus 5000 Series switch in the fabric. The Cisco Nexus 5000
Series switch in the fabric is identified by the switch WWN.
switch# show wwn switch
Switch WWN is 20:00:00:05:30:00:54:de
Step 2
Explicitly enable DHCHAP in this switch.
Note
switch(config)# fcsp enable
Configure a clear text password for this switch. This password will be used by the connecting device.
Step 3
switch(config)# fcsp dhchap password rtp9216
Configures a password for another switch in the fabric that is identified by the switch WWN device
Step 4
name.
switch(config)# fcsp dhchap devicename 20:00:00:05:30:00:38:5e password rtp9509
Enable the DHCHAP mode for the required Fibre Channel interface.
Step 5
Whenever DHCHAP port mode is changed to a mode other than the Off mode, reauthentication is
Note
performed.
switch(config)# interface fc2/4
switch(config-if)# fcsp on
Step 6
Verify the protocol security information configured in this switch by displaying the DHCHAP local
password database.
switch# show fcsp dhchap database
DHCHAP Local Password:
Other Devices' Passwords:
Step 7
Display the DHCHAP configuration in the Fibre Channel interface.
switch# show fcsp interface fc2/4
fc2/4
Repeat these steps on the connecting MDS 9509 switch.
Step 8
MDS-9509# show wwn switch
Switch WWN is 20:00:00:05:30:00:38:5e
MDS-9509(config)# fcsp enable
MDS-9509(config)# fcsp dhchap password rtp9509
MDS-9509(config)# fcsp dhchap devicename 20:00:00:05:30:00:54:de password rtp9216
MDS-9509(config)# interface fc 4/5
MDS-9509(config-if)# fcsp on
MDS-9509# show fcsp dhchap database
DHCHAP Local Password:
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
44-10
When you disable DHCHAP, all related configurations are automatically discarded.
Non-device specific password:*******
Password for device with WWN:20:00:00:05:30:00:38:5e is *******
fcsp authentication mode:SEC_MODE_ON
Status:Successfully authenticated
Non-device specific password:*******
Chapter 44
Figure
44-2, perform this task:
Configuring FC-SP and DHCHAP
OL-16597-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents