Purging Persistent Fc Ids; Verifying Fcdomain Information - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Cisco nexus 5000 series switch cli software configuration guide, nx-os 4.0(1a)n1 (ol-16597-01, january 2009)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Verifying fcdomain Information

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

Purging Persistent FC IDs

To purge persistent FC IDs, perform this task:
Command
Step 1
switch# purge fcdomain fcid vsan
vsan-id
switch# purge fcdomain fcid vsan
vsan-id - vsan-id
Verifying fcdomain Information
Note
If the fcdomain feature is disabled, the runtime fabric name in the display is the same as the configured
fabric name.
This example shows how to display information about fcdomain configurations:
switch# show fcdomain vsan 2
Use the show fcdomain domain-list command to display the list of domain IDs of all switches
belonging to a specified VSAN. This list provides the WWN of the switches owning each domain ID.
The next example uses the following values:
switch# show fcdomain domain-list vsan 76
Number of domains: 3
Domain ID
---------
0xc8(200)
0x63(99)
0x61(97)
Use the show fcdomain allowed vsan command to display the list of allowed domain IDs configured
on this switch..
switch# show fcdomain allowed vsan 1
Assigned or unallowed domain IDs: 1-96,100,111-239.
[Interoperability Mode 1] allowed domain IDs: 97-127.
[User] configured allowed domain IDs: 50-110.
Tip
Ensure that the requested domain ID passes the switch software checks, if interop 1 mode is required in
this switch.
The following example shows how to display all existing, persistent FC IDs for a specified VSAN. You
can also specify the unused option to view only persistent FC IDs that are still not in use.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
33-18
A switch with WWN of 20:01:00:05:30:00:47:df is the principal switch and has domain 200.
A switch with WWN of 20:01:00:0d:ec:08:60:c1 is the local switch (the one where you typed the
CLI command to show the domain-list) and has domain 99.
The IVR manager obtained virtual domain 97 using 20:01:00:05:30:00:47:df as the WWN for a
virtual switch.
WWN
-----------------------
20:01:00:05:30:00:47:df [Principal]
20:01:00:0d:ec:08:60:c1 [Local]
50:00:53:0f:ff:f0:10:06 [Virtual (IVR)]
Chapter 33
Purpose
Purges all dynamic and unused FC IDs in the specified
VSAN.
Purges dynamic and unused FC IDs in the specified VSAN
range.
Configuring Domain Parameters
OL-16597-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents