Igmp Snooping Interface Configuration - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
The following table displays information about the global IGMP snooping status and statistics
on the page.
Field
Multicast Control Frame
Count
Interfaces Enabled for IGMP
Snooping
Data Frames Forwarded by
the CPU
VLAN Ids Enabled For IGMP
Snooping
VLAN Ids Enabled For IGMP
Snooping Querier

IGMP Snooping Interface Configuration

Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings
on specific interfaces.
To access the IGMP Snooping Interface Configuration page, click Switching> Multicast >
IGMP Snooping > IGMP Snooping Interface Configuration.
To configure IGMP Snooping interface settings:
1. To configure IGMP Snooping settings for a physical port, click the unit ID of the stack
member with the ports to configure.
2. To configure IGMP Snooping settings for a Link Aggregation Group (LAG), click LAGS.
Description
Displays the number of multicast control frames that have been processed
by the CPU.
Lists the interfaces currently enabled for IGMP Snooping. To enable
interfaces for IGMP snooping, see
on page 140.
Displays the number of data frames forwarded by the CPU.
Displays VLAN IDs enabled for IGMP snooping. To enable VLANs for IGMP
snooping, see IGMP Snooping VLAN Configuration
Displays VLAN IDs enabled for IGMP snooping querier.
140
IGMP Snooping Interface Configuration
on page 142.