NETGEAR GS728TS Admin Manual page 56

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Field
Tx_dll_ready
Rx_dll_enabled
Rx_dll_ready
Time Since Counters Last
Cleared
5. To view information received from a partner link, select the port connected to the remote
device from the Interface menu in the Remote Device Information area.
The page refreshes and shows the information in the following table if LLDP data has
been received on the interface
Field
Remote ID
Remote Tw_sys_tx
(uSec)
Remote Tw_sys_tx
Echo (uSec)
Remote Tw_sys_rx
(uSec)
Remote Tw_sys_rx
Echo (uSec)
Remote Fallback
Tw_sys (uSec)
6. Click Clear to reset the counters on the page to their default values.
7. Click Refresh to update the page with the current information.
Description
Data Link Layer ready: This variable indicates that the tx system
initialization is complete and is ready to update/receive LLDP PDUs
containing EEE TLV.
Status of the EEE capability negotiation on the local system.
Data Link Layer ready: This variable indicates that the rx system
initialization is complete and is ready to update/receive LLDP PDUs
containing EEE TLV.
Time Since Counters Last Cleared (since the time of power up, or after
EEE counters are cleared).
Description
Specifies the remote client identifier assigned to the remote system.
Integer that indicates the value of Tw_sys that the remote system can support.
Integer that indicates the value Transmit Tw_sys echoed back by the remote
system.
Integer that indicates the value of Tw_sys that the remote system requests from
the local system.
Integer that indicates the value of Receive Tw_sys echoed back by the remote
system.
Integer that indicates the value of fallback Tw_sys that the remote system is
advertising.
56