Document Organization - NETGEAR GS728TS Admin Manual

Getting Started
1.
The NETGEAR GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Software
®
Administration Manual describes how to configure and operate the GS728TS, GS728TPS,
GS752TS, and GS752TPS Gigabit Smart Switches by using the Web-based graphical user
interface (GUI). This manual describes the software configuration procedures and explains the
options available within those procedures.

Document Organization

The GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Software
Administration Manual contains the following chapters:
• Chapter 1, Getting
configuration and accessing the user interface.
• Chapter 2, Configuring System
features such as SNMP, DHCP, PoE, and Green Ethernet. It also describes how to
configure stacking on the switches.
• Chapter 3, Configuring Switching
layer 2 switching features.
• Chapter 4, Configuring
• Chapter 5, Configuring Quality of
Lists (ACLs), and how to configure Differentiated Services and Class of Service features.
• Chapter 6, Managing Device
security information such as port access control and RADIUS server settings.
• Chapter 7, Monitoring the
the switch and its ports, and to configure how the switch monitors events.
• Chapter 8, Maintaining the
• Chapter 9, Accessing
switch.
• Appendix A, Hardware Specifications and Default
specifications and default values on the GS728TS, GS728TPS, GS752TS, and
GS752TPS Smart Switches.
Started, contains information about performing the initial system
Information, describes how to configure administrative
Information, describes how to manage and monitor the
Routing, describes how to manage and monitor IP routing.
Service, describes how to manage the Access Control
Security, contains information about configuring switch
System, describes how to view a variety of information about
System, describes features to help you manage the switch.
Help, describes how to access Online Help resources for the
9
Values, contains hardware
1