Change Password - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches

Change Password

Use the page to change the login password. To display the page, click Security >
Management Security > User Configuration > Change Password.
To change the login password for the management interface:
1. Specify the current password in the Old Password. The entered password will be
displayed in asterisks (*). Passwords are 1–20 alphanumeric characters in length and
are case sensitive.
2. Enter the new password. It will not display as it is typed, and only asterisks (*) will show on
the screen. Passwords are 1–20 alphanumeric characters in length and are case sensitive.
3. To confirm the password, enter it again to make sure you entered it correctly. This field will
not display, but will show asterisks (*).
4. Use the Reset Password field to reset the password to the default value.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. If you make changes to the page, click Apply to apply the changes to the system.
7. Click Refresh to update the screen with the current information.
Note: In the case of a lost password, press the Factory Default Reset
button on the front panel for more than one second to restore the
factory default. The reset button will only reboot the device.
198