Igmp Snooping Vlan Configuration - NETGEAR GS752TP Software Administration Manual

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Table 21. IGMP Snooping Table.
Field
MAC Address
VLAN ID
Type
Description
Interface
Click CLEAR to clear one or all of the IGMP Snooping entries.

IGMP Snooping VLAN Configuration

Use the IGMP Snooping VLAN Configuration screen to configure IGMP snooping settings for
VLANs on the system.
To configure IGMP snooping settings for VLANs:

1. Select Switching
The following screen displays:
2. Select the VLAN ID and configure the IGMP Snooping values:
• Fast Leave Admin Mode. Enable or disable the IGMP snooping fast leave mode for
the specified VLAN ID. Enabling fast-leave allows the switch to immediately remove
Description
A multicast MAC address for which the switch has forwarding and filtering
information. The format is six 2-digit hexadecimal numbers that are
separated by colons, for example, 01:00:5e:45:67:89.
A VLAN ID for which the switch has forwarding and filtering information.
This field displays the type of the entry. Static entries are configured by the
end user. Dynamic entries are added to the table as a result of a learning
process or protocol.
The text description of this Multicast table entry. Possible values are
Management Configured, Network Configured, and Network Assisted.
The list of interfaces that are designated for forwarding (Fwd) and filtering
(Flt) for the associated address.
Multicast IGMP Snooping
 
Configuring Switching Information
110
IGMP Snooping VLAN Configuration.
