Auto-Video Configuration - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
The following table describes the information available on the MFDB Statistics page:
Field
Max MFDB Table Entries
Most MFDB Entries Since
Last Reset
Current Entries
Click Refresh to update the information on the screen with the most current data.

Auto-Video Configuration

The Auto-Video feature simplifies IGMP Snooping Querier configuration if the switch
supports devices or applications running multicast traffic, such as video surveillance
cameras.
To access the Auto-Video Configuration page, click Switching> Multicast > Auto-Video.
To configure the Auto-Video feature:
1. Enable or disable the Auto-Video feature.
• Enable. The IGMP Snooping Querier is automatically configured with the default
VLAN ID for the Auto-Video VLAN
• Disable. IGMP Snooping settings must be manually configured.
2. Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch
Description
Displays the maximum number of entries that the Multicast Forwarding
Database table can hold.
The largest number of entries that have been present in the Multicast
Forwarding Database table since the system was last reset. This value is
also known as the MFDB high-water mark.
Displays the current number of entries in the Multicast Forwarding Database
table.
137