Statistics - NETGEAR GS728TS Admin Manual

Gigabit smart switches
Hide thumbs Also See for GS728TS:
Table of Contents

Advertisement

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches

Statistics

Use this page to view per-interface DHCP snooping statistics.
To access the DHCP Snooping Statistics page, click System
Statistics.
Use the DHCP Snooping Statistics page to view the DHCP Snooping statistics.
1.
To view settings for a physical port, click the unit ID of the stack member with the ports
to view.
2.
To view settings for a Link Aggregation Group (LAG), click LAGS.
3.
To view settings for both physical ports and LAGs, click ALL.
4.
View the following DHCP snooping statistics:
The Interface field shows the untrusted and snooping enabled interface for which
statistics to be displayed.
The MAC Verify Failures field shows the number of packets that were dropped by
DHCP Snooping as there is no matching DHCP Snooping binding entry found.
The Client Ifc Mismatch field shows the number of DHCP messages that are
dropped based on source MAC address and client HW address verification.
The DHCP Server Msgs Received field shows the number of Server messages that
are dropped on an un trusted port.
5.
Click Clear to clear all interfaces statistics.
6.
Click Refresh to refresh the data on the screen with the latest statistics.
Services
98
DHCP Snooping

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs752tpsGs752tsGs728tps

Table of Contents