Main Assembly G: Cutter Unit - Epson EU-T432 Technical Manual

Confidential

Main Assembly G: Cutter unit

Reassembly
Part name
step
1 Cutter unit, B
C.B.S-tite (M3 × × × × 5)
6-24 Assembly and Disassembly
Install the cutter unit, B to the frame assembly and secure it with screws,
× 2
while the lead wire, paper cutter is passed through the hook on the frame
assembly.
lead wire, paper cutter
platen
<Check>
Tightening torque: 834 to 932 mN•m {8.5 to 9.5 kg•cm}
Make sure that the lead wire, paper cutter is passed through the hook on
the frame assembly properly as shown above.
Make sure that the lead wire, paper cutter is not caught between any
places when securing the cutter unit.
Install the cutter unit, B in the platen-up state.
Lubricate the point where the fixed blade of the cutter unit, B contacts the
cutter frame with G-15.
cutter unit, B
Assembly procedure
G-15
C.B.S-tite (M3 × 5)
cutter unit
frame assembly
G-15
Rev. A