Main Assembly D: Thermal Print Head Assembly - Epson EU-T432 Technical Manual

Confidential

Main Assembly D: Thermal print head assembly

Reassembly
Part name
step
1 Thermal print head
assembly
6-20 Assembly and Disassembly
Install the thermal print head assembly in the grooves on the frame
assembly.
<Check>
When handling the thermal print head assembly, use proper body
grounding procedures to avoid static electricity.
(Use a conductive mat and wrist band during assembly.)
Do not touch the connector terminals and the surface of the thermal print
head assembly. If foreign matter attaches to them, wipe off the foreign
matter lightly, using a cotton swab dampened with alcohol.
Assembly procedure
thermal print head
assembly
frame assembly
Rev. A