Installing The Slide Bracket Assemblies - HP DL760 - ProLiant - 1 GB RAM User Manual

Installing the Server in a Rack

Installing the Slide Bracket Assemblies

To install the slide bracket assemblies in the rack:
1. Install the slide bracket assembly by pulling and holding the lock lever in the
forward most position (1) and inserting the bracket hooks in the rear vertical
column at the pencil marked locations (2).
2. Install the hooks in the front locations (3). Top front hooks align with the lower
arrow marks on the inside of each gray plastic cover.
Figure 2-11: Installing the slide bracket assembly
2-22 HP ProLiant DL760 Generation 2 Server User Guide