HP DL760 - ProLiant - 1 GB RAM User Manual page 214

Starting the Array Configuration Utility
The ACU software can be run from CD or from within supported operating systems.
Running ACU from the SmartStart CD
The ProLiant DL760 G2 server is shipped with the ACU on the SmartStart CD. Start
the utility as described in the following procedure. If, for any reason, you cannot start
the utility as described here, the utility is available in a variety of locations.
1. Power off the server, if necessary, then power on the server.
2. Boot the SmartStart CD.
3. Select the Maintenance tab at the top.
4. Select the Array Configuration Utility program.
When you start the ACU, the software checks the configuration of each controller
and its drive arrays. The ACU defaults to the standard configuration path. If you
would like to run the configuration wizards, select them from the right-hand side of
the screen.
Online Help
The configuration wizards contain context-sensitive help on the right hand side of the
screen. To access more detailed help, or for help on the standard configuration
screens, click help on the top right of the screen.
HP ProLiant DL760 Generation 2 Server User Guide
Configuring the Server
8-21