Warnings And Precautions - HP DL760 - ProLiant - 1 GB RAM User Manual

Installing the Server in a Rack

Warnings and Precautions

Before beginning the following procedures, be sure you understand the following
warnings:
63−73 kg
140−161 lb
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
•
•
•
•
•
CAUTION: To maintain optimum cooling, a perforated rack door must be used with
this server. Failure to use a properly ventilated door results in thermal damage to
your server. Compaq branded 7000 series racks require an upgraded door. You can
order a high-airflow perforated door from HP, Part Number [P/N] 327881-B21 for a
42U rack, or Part Number [P/N] 157847-B21 for a 22U rack.
IMPORTANT: To reduce the overall weight of the system, HP recommends that all power
supplies, the I/O module, and the processor and memory module be removed from the server
before loading it onto the rails.
2-16
WARNING: To reduce the risk of personal injury or damage to the
equipment:
•
Observe local occupational health and safety requirements and
guidelines for manual material handling.
•
Obtain adequate assistance to lift and stabilize the chassis during
installation or removal.
•
The product will be unstable when not fastened to the rails.
•
Remove all hot-plug power supplies and drives to reduce the
overall weight of the product.
The leveling jacks are extended to the floor.
The full rack weight rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single rack installation.
The racks are coupled together in multiple rack installations.
A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
HP ProLiant DL760 Generation 2 Server User Guide