Led Indicators And Switches; Led Indicators - HP DL760 - ProLiant - 1 GB RAM User Manual

LED Indicators

Status LEDs are located on the front, back, and inside of your server. These LEDs
communicate the current status of varying aspects of the server components and
operations, thus aiding you in diagnosing problems. The following ProLiant DL760
G2 server LEDs are explained in this chapter.
•
System power LED—Located on the server above the power button
•
Auxiliary power LED—Located on the I/O board
•
System interconnect LEDs—Located on the top of the server
•
System attention LEDs—Located on the front left side of the server
•
Hot-plug SCSI hard drive LEDs—Located on the front of each hard drive
•
Power supply LEDs—Located on the rear of the server
•
Hot-plug fan LEDs—Located on each fan inside the server
•
PCI Hot Plug LEDs—Located on the rear of the server and
inside the I/O module
•
Memory cartridge LEDs—Located on the memory cartridges
•
DIMM status LEDs—Located on the front right side of the server
HP ProLiant DL760 Generation 2 Server User Guide

LED Indicators and Switches

D
D-1