8. Install the SCSI terminator supplied on the other external SCSI connector on the
rear panel of the external storage device.
Figure 4-5: Connecting an external mass storage device
9. Restore power to the external storage device.
10. Connect all power cords and power up the server. Refer to Chapter 7 for more
information.
11. To configure the device, refer to the documentation provided with the external
storage device.
Non-Hot-Plug I/O Expansion
The PCI/PCI-X slots of the ProLiant DL760 G2 server I/O board support a variety of
industry-standard expansion boards.
WARNING: To reduce the risk of personal injury from hazardous energy or
damage to the equipment when working on energized servers:
•
•
HP ProLiant DL760 Generation 2 Server User Guide
Remove all watches, rings, and any other loose-fitting jewelry.
Avoid the use of conductive tools that could bridge live parts.
Installing Hardware Options, Server Power Off
4-7