Video; Redundant Hot-Plug Power Supplies - HP DL760 - ProLiant - 1 GB RAM User Manual

Server Features

Video

The HP Integrated PCI Video Controller with 8 MB of video RAM can obtain a
maximum resolution of 1280 x 1024 in 32-bit true color. The PCI video controller
supports:
•
From 16 to more than 256 colors, depending on graphics mode.
•
SVGA, VGA, and EGA graphics resolution.

Redundant Hot-Plug Power Supplies

The ProLiant DL760 G2 server supports 1150-W redundant hot-plug power supplies.
WARNING: Hot-plug power supplies are not designed to be installed with AC
current connected to the power supply. To prevent personal injury or damage
to the equipment, be sure to disconnect the power supply from AC current
before removal or installation of the power supply.
•
Power supplies are load balancing and have microcontroller monitoring for
advanced health and configuration management.
•
The ProLiant DL760 G2 server supports up to two power supplies. Refer to the
"Power Requirements" section of Chapter 2 to determine power supply
requirements.
CAUTION: To prevent data corruption, do not connect the server to a low line power
source (110 VAC). Low line power is not supported.
IMPORTANT: Most system configurations require 200-240 VAC. Use 200-240 VAC line cords
to power the server.
NOTE: A few server configurations may exceed the power rating of a single power supply,
resulting in a loss of power redundancy for the server. Use the ProLiant DL760 G2 Power
Calculator available on ActiveAnswers to ensure that power redundancy will be maintained for
your configuration.
1-14 HP ProLiant DL760 Generation 2 Server User Guide