HP DL760 - ProLiant - 1 GB RAM User Manual page 157

Installing Hardware Options, Hot-Pluggable
Table 5-5: I/O Expansion Slots
Slot Description
Slots 1 and 2 Bus 19—Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI
expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling.
Slots 3 and 4 Bus 13—Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI
expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling.
Slots 5 and 6 Bus 11—Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI
expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling.
Slots 7 and 8 Bus 7—Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI
expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling.
Slot 9 Bus 0—Supports PCI expansion boards at 33 MHz; it is keyed for 5v signaling.
Slots 10 and 11 Bus 3—Supports PCI-X expansion boards at 100 MHz and 66 MHz or PCI
expansion boards at 66 MHz and 33 MHz; it is keyed for 3.3v signaling.
Note: The operating system detects PCI devices in the following slot order: 9-10-11-7-8-5-6-3-4-1-
2.
NOTE: It is recommended that you install the optional RILOE II board into slot 9.
NOTE: Each PCI-X bus will automatically configure to run in the most advanced mode
(PCI-X or PCI) and the highest frequency supported by all expansion boards installed in the
slots on the bus.
NOTE: The ProLiant DL760 G2 server ships with a NIC preinstalled in slot 11.
5-42 HP ProLiant DL760 Generation 2 Server User Guide