Table E-5: Are all of the System Interconnect Status LED Indicators Off?
Refer to "System Interconnect LED Indicators" in Appendix D.
Yes
HP ProLiant DL760 Generation 2 Server User Guide
There is a broken connection between the
I/O board and the power switch.
A power supply problem may exist. The
power supply may not be connected or
inserted properly, may have a damaged
connector, or may have failed.
The system midplane may need to be
replaced.
Troubleshooting Information
continued
•
Check the power source to
verify that an adequate
supply of AC power exists.
•
Remove the power supply
and check for a damaged
connector. If the connector
appears okay, reinsert the
power supply, firmly and
correctly.
•
Verify the proper
connection of all power
cables.
Refer to the HP Servers
Troubleshooting Guide for
further options.
E-13