HP DL760 - ProLiant - 1 GB RAM User Manual page 162

Microsoft Windows Server 2003
Supported PCI Hot Plug Functionality
PCI Hot Plug support within Microsoft Windows Server 2003 provides full PCI Hot
Plug capability including:
•
Hot-add
•
Hot-replace
•
Hot-removal
•
Hot-upgrade
PCI Hot Plug operations can be initiated through the use of the PCI/PCI-X slot power
buttons or the Windows Server 2003 Eject/Remove Hardware applet that is accessed
through the Windows Status box.
CAUTION: Before removing any PCI/PCI-X expansion board, be sure to turn off
power to the PCI/PCI-X slot by using either the PCI/PCI-X power button or the
Windows Server 2003 Eject/Remove Hardware applet. Failure to do so will result in a
"surprise-style" removal and may result in system failure.
Software Components
PCI Hot Plug support for Windows Server 2003 is provided through the PCI Hot
Plug Filter driver. This component is included in the ProLiant Support Pack for
Windows Server 2003.
Installing PCI Hot Plug Support
The ProLiant Support Pack for Microsoft Windows Server 2003 contains all of the
software components required to support PCI Hot Plug. Included on the Support Pack
are hot-plug-aware device drivers, such as HP NC 7770 controllers and the Smart
Array 5300 controller. The Support Pack also provides the PCI Hot Plug Filter driver
and the System Management drivers.
HP ProLiant DL760 Generation 2 Server User Guide
Installing Hardware Options, Hot-Pluggable
5-47