HP DL760 - ProLiant - 1 GB RAM User Manual page 223

Software Management
8. Press the F10 key at the prompt to confirm the exit from RBSU.
The changes you have entered will not be displayed on the Display Panel until you
reboot the computer. Standard IMD fields are defined in the "Navigating the Menus"
section later in this chapter.
Setup with the Integrated Management Display Utility
After installing the hardware and software, you can configure the Integrated
Management Display using the Integrated Management Display Utility. This utility is
used to configure your IMD in Windows.
To run the Integrated Management Display Utility:
1. Boot the computer and log on to the system as administrator or a user with
administrator privileges.
2. Select Start, Programs, System Tools, Integrated Management Display
Utility.
3. Select the Field box and click the down arrow to open a pull-down menu of the
various fields of the IMD to edit.
4. Select Idle Screen. Three lines of information can be displayed on the IMD.
5. To change the values in lines 1, 2, and 3, click the arrow to the right of the line.
6. Click Save to finish editing. This action will save your changes and update
the IMD.
7. Click Exit to return to the system.
9-4 HP ProLiant DL760 Generation 2 Server User Guide