Additional Ups Features; Usb Port - Eaton Powerware 5130 Rack/Tower UPS 1250-3000 VA User Manual

Chapter 5

USB Port

EATON Powerware

Additional UPS Features

This section describes:
S
USB port
S
RS-232 communication port
S
Communication card
S
Load segments (PowerShare)
The Powerware 5130 UPS includes a USB port, a RS-232
communication port, and a bay for an optional communication card. The
USB and RS-232 ports cannot operate simultaneously.
The UPS can communicate with a USB-compliant computer using
Powerware LanSafe Power Management Software or other
®
HID-compliant power management software compatible with Microsoft
Windows 2000 and XP operating systems that support HID devices.
®
NOTE The latest versions of the Powerware LanSafe Power Management Software and
the USB firmware are available at www.powerware.com.
To establish communication between the UPS and a computer:
1. The USB port is hot-pluggable. Connect the USB cable to the USB
port on the UPS rear panel (see Figure 20).
Connect the other end of the USB cable to the USB port on your
computer.
®
5130 Rack/Tower UPS (1250–3000 VA) User's Guide
S
164201730 Rev 2
www.powerware.com
®
39