Additional Ups Features; Usb Port - Eaton Powerware 5130 User Manual

Chapter 5

USB Port

Additional UPS Features

This section describes:
S
USB port
S
RS-232 communication port
S
Communication card
S
Load segments (PowerShare)
The Eaton 5130 UPS includes a USB port, a RS-232 communication port,
and a bay for an optional communication card. The USB and RS-232
ports cannot operate simultaneously.
The UPS can communicate with a USB-compliant computer using
LanSafe Power Management Software or other HID-compliant power
®
management software compatible with Microsoft
XP operating systems that support HID devices.
NOTE The latest versions of the LanSafe Power Management Software and the USB
firmware are available at www.eaton.com/powerquality.
To establish communication between the UPS and a computer:
1. The USB port is hot-pluggable. Connect the USB cable to the USB
port on the UPS rear panel (see Figure 20).
Connect the other end of the USB cable to the USB port on your
computer.
Eaton 5130 Rack/Tower UPS (1000–3000 VA) User's Guide
Windows
®
S
164201730 Rev 4
www.eaton.com/powerquality
2000 and
®
39