Additional Ups Features; X-Slot Cards - Eaton Powerware 9125 Two-in-One UPS 2500 User Manual

Chapter 6

X-Slot Cards

EATON Powerware

Additional UPS Features

This section describes:
S
X-Slot cards
S
Network transient protector
S
Load segments
X-Slot cards allow the UPS to communicate in a variety of networking
environments and with different types of devices. The Powerware 9125
is factory-installed with a Single-Port Card, which can be replaced with
one of the following X-Slot cards:
S
ConnectUPS -X Web/SNMP Card - has SNMP and HTTP capabilities t
as well as monitoring through a Web browser interface; connects to a
twisted-pair Ethernet (10/100BaseT) network. It has a built-in
switching hub that allows three additional network devices to be
connected to the network without the requirement of additional
network drops. In addition, a Powerware Environmental Monitoring
Probe can be attached to obtain humidity, temperature, smoke alarm,
and security information.
S
Relay Interface Card - has isolated dry contact (Form-C) relay outputs
for UPS status: Utility failure, Low battery, UPS alarm/OK, or On
bypass.
S
Modbus Card - allows you to continuously and reliably monitor the
®
UPSs in your Building Management System (BMS).
S
Multi-Server Card - has six serial communication ports that can
communicate simultaneously with other computers using Powerware
LanSafe Power Management Software (provided on the Software
®
Suite CD).
S
USB Card - connects to a USB port on your computer.
®
9125 Two-in-One UPS (2500/3000 VA) User's Guide
S
164201374 Rev D
www.powerware.com
45