2. Press the l Paper Source button until the
LCD display.
3. Feed the sheet into the paper slot until it meets resistance. Make sure the
right edge of the paper is straight and aligned with the vertical line on
the roll paper cover.
4. Press d. The sheet feeds into printing position automatically.
5. If you see a question on the display about paper settings, select
settings are correct, or select
to save your settings.
6. Print your page. After it is finished, the sheet stays in the printer.
7. To remove your print, press the d button while holding the sheet.
Using Film and Other Media
and then change the settings. Press
No
67
|
sheet icon appears on the
if the
Yes
67
OK