Epson STYLUS Pro WT7900 User Manual page 109

Message
(in alphabetical order)
NO CARTRIDGE
INSTALL INK CARTRIDGE
NO MAINTENANCE TANK
INSTALL THE RIGHT SIDE
MAINTENANCE TANK
NOT ENOUGH EMPTY
SPACE
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
NOZZLE CLOG DETECTED
NOT ENOUGH EMPTY
SPACE IN MAINT TANK
CONTINUE CLEANING?
NOZZLE CLOG DETECTED
NOT ENOUGH INK
CONTINUE CLEANING?
PAPER CUT ERROR
REMOVE UNCUT PAPER
PAPER EJECT ERROR
REMOVE PAPER FROM
PRINTER
PAPER ERROR
LOAD PAPER CORRECTLY
PAPER JAM
REMOVE PAPER
PAPER LOW
Explanation
Ink cartridge(s) not installed, or
an incorrect cartridge is
installed.
Maintenance tank is not
installed.
The maintenance tank is too
full for head cleaning.
Not enough space in the
maintenance tank to finish
head cleaning.
Not enough ink for head
cleaning.
Roll paper was not cut
correctly.
The cutter may be blunt or
incorrectly installed.
Roll paper is used with the cut
sheet setting.
Paper is not loaded correctly.
Paper has jammed in the
printer.
The paper roll is almost used
up.
109
Solving Problems
Response
Install ink cartridge(s); see page 88. Do not
reinstall the incorrect cartridge.
Make sure the maintenance tank is fully
inserted.
Replace the maintenance tank; see page 97.
Select Yes and replace the maintenance
tank; see page 97.
Replace the cartridge(s) before cleaning; see
page 88.
Press the button and open the front
cover. Remove the uncut paper.
Reinstall or replace the cutter if necessary;
see page 94.
Press the button and remove the paper.
Press the button, then reload paper
correctly.
Press the button and remove the
jammed paper; see page 117 for more
information.
Replace the roll.
| 109