Aligning The Print Head - Epson STYLUS Pro WT7900 User Manual

Tip: For best results, use
the same width of paper
that you plan to print with.
Note: When you select
the paper type, it
automatically sets the
paper thickness for Epson
media.
Maintaining and Transporting the Printer
—The printer will not perform automatic nozzle checks and
• OFF
cleaning cycles.
4. Press , then select
l
5. Select
ON: EVERY PAGE
before each print job, or select
turned by default. These settings take effect only when you print
OFF
on roll paper.
6. Press to save the setting.
OK

Aligning the Print Head

Aligning the print head is one of the most important things you can do to
ensure the best print quality. If vertical banding appears on your prints, if
they look grainy or blurry, or if you see misregistration or "ghosting," you
need to align the print head.
If you haven't already done so, it's a good idea to run a nozzle check before
aligning the print head (page 83). This ensures that the print head alignment
patterns print correctly.
Follow these steps to align the print head:
1. Load the bundled roll paper included with the printer. You can also use
Epson film or other compatible Epson media.
2. Press r .
Menu
3. Press u or until
d
4. Make sure
PAPER THICKNESS
5. Make sure
SELECT PAPER TYPE
the paper type loaded in the printer and press
if you've loaded the bundled paper included with the printer.
Paper
6. Press l twice to return to the Head Alignment menu.
7. Press d to select
ALIGNMENT
PRINT NOZZLE PATTERN
to have the nozzle check pattern printed
ON: EVERY 10 PAGES
HEAD ALIGNMENT
is highlighted, then press r.
is highlighted, then press r. Select
, then press r.
87
and press r.
. The setting is
is selected, then press r.
. Select
OK Bundle Roll
| 87