Epson STYLUS Pro WT7900 User Manual page 110

110 | Solving Problems
Message
(in alphabetical order)
PAPER OUT
LOAD PAPER
PAPER RELEASED
LOAD PAPER
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD THE CORRECT PAPER
PAPER SETTING ERROR
CHECK THE PAPER SOURCE
IN THE DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
PAPER SIZE ERROR
LOAD CORRECT PAPER SIZE
PAPER SKEW
LOAD PAPER PROPERLY
PRINTER ERROR
RESTART THE PRINTER
REMOVE AND SHAKE
WHITE INK CARTRIDGE
ONCE A WEEK
REPLACE MAINTENANCE
TANK SOON
SOME NOZZLES ARE
CLOGGED
Explanation
No paper is loaded.
The button has been
pressed with no paper loaded.
Paper ran out during printing.
The button has been
pressed.
The paper is not detected.
The paper source selected in
your printer software and the
control panel do not match.
The loaded paper size does not
match the size of the image.
Paper is not loaded straight.
You tried to print while an error
condition was present.
It's been a week since the
white ink cartridge was shaken.
The maintenance tank is almost
full.
During automatic head
cleaning, the printer was
unable to clean the print head
after one or two cleaning
cycles.
110
Response
Load paper.
Press the button, then load paper.
Press the button and remove the roll
paper core. Then load another roll.
Load paper, then press the
Press the button to clear the error,
then select the right paper.
Check the paper source settings and make
sure the paper is loaded correctly.
Make sure the paper size matches the size
of the image.
Press the button and make sure the
paper is loaded straight.
Press the P power button to turn off the
printer, then turn it back on.
To maintain optimal print quality, shake the
white ink cartridge as soon as possible. See
page 79 for instructions.
Make sure you have a replacement
maintenance tank.
You can continue to print, but you may
notice a decline in print quality. If necessary,
check and clean the print head as described
on page 83.
button.