Installing Ink - Epson STYLUS Pro WT7900 User Manual

Caution: Do not use an
outlet that is controlled
by an automatic timer or
wall switch. Otherwise,
you may accidentally shut
off the printer and cause
damage.
Caution: Always turn off
the printer by pressing
the P power button.
During shutdown, the
printer caps the print
head and flushes it with
cleaning fluid. This takes
several minutes to
complete. To prevent
damage, never unplug
the printer during this
process.
8. Attach the cable guides to the left or right side of the printer back and
route the power cord to the side of the printer as shown.
Power cord on left side
9. Plug the power cord into a properly grounded electrical outlet.

Installing Ink

Use the ink cartridges that came with your printer for initial ink charging.
During the initial installation process, it is normal for most of the ink in each
cartridge to be used.
The cartridges shipped with your printer are provided mainly to charge the
ink system. Make sure you order a new set of cartridges as soon as possible.
1. Press the P power button to turn on the printer. In a moment,
INSTALL INK CARTRIDGE
covers pop open slightly.
Setting Up the Printer
appears on the LCD display and the ink
37
| 37
Power cord on right side