Table of Contents
Advertisement
Before sending documents
Setting reproduction quality
Follow this procedure to set the quality of the
reproduction for transmission or making a copy
according to the contents of your document"
When neither the FINE or HALFTONE lamp is on, the
fax is set for standard reproduction quality. Make
these settings before you send or copy a document.
After you turn the power on, the fax is set for
standard text. The FINE and HALFToNE
lamps
are off.
Press ffi
to turn on the F|NE
lamp, press again to turn on HALFToNE,
and
again to turn both lamps off. Every time you
press this key, the setting alternates between
these three modes.
Standard
HALFTONE
Here is a summary of how these settings are to be
used.
Standard text
lf the document contains only standard typed teld with
no photos or illustrations,
send it with both the FINE
and HALFTONE lamps off.
Standard text with increased clarity
For the best text reproduction possible, press
ffi
until the FINE lamp lights.
Text with photos or graphics
To reproduce the shades and halftones of
photographs, illustrations, or other graphics, press
ffi
untilthe HALFToNE lamp lights
42
Advertisement
Table of Contents
