Table of Contents
Advertisement
G/ossary
C N G
Coded speed dialing
cursor
default setting
destination label
Distinctive Ring Pattern
Detector (DRPD)
document feeder
document
E C M
error transmission report:
fax number report
FAVTEL Switch
FAVTEL aulo switchover
Stands tor calling tone. This is a signal sent with facsimile
transmissions to identify the call as an incoming document.
When the receiving fax detects this signal, it automatically
starts lo receive the facsimile transmission. The majority of
facsimile machines in use today can send and detect CNG
signals. However, if the sender dials manually, or if the
document is sent from a fax that cannot send a CNG signal,
to receive the document the receiver will have 10 answer lhe
fax manually, press the start key after they hear the tone on
the handset, and then hang up the handset. One{ouch and
Coded speed dial on your fax always send this CNG signal
when you send a facsimile transmission. lf you pick up the
handset and dial manually to send a document, this signal is
not senl and the receiver will have to receive manually.
Lets you dial up to 30 facsimile numbers at the touch of 3
keys. Each number can be up to 38 digils long.
The underline symbol you see in the one-line display when
you register numbers and names in the fax. To move the
cursor press the search keys ( < > )
A value used in the absence of one set by you. The user
settings can be us6d to change preset default values.
Attachable label used to label speed dial kevs on the
facsimile machine.
This feature works together with optional services provided
by some local phone companies. Using a single telephone
line, separate numbers are given to fax calls and voice calls
based on a designated ring pattern which, when dialed, will
ring at the same telephone line with ils own distinctive ring.
Therefore, each call is answered properly as a fax or voice
call,
Holds documents being fed into the facsimile for
transmission or copying.
The sheet of paper with the teld that you want to send
t h r o u g h t h e f a c s i m i l e .
Error correction mode. Reduces system and line errors when
sending or receiving from another fax with ECM capability
When an error occurs, or if a document cannot be sent for
any other reason, an error transmission report is
automatically printed. The report lists the fax number of the
other party.
Lists all facsimile and phone numbers registered for
One{ouch and Coded speed dialing.
This switch allows you to set the fax to FMffEL auto
switchover (ON) or automatic receiving (OFF)
Funclion to automatically switch your fax between facsimile
or teleohone modes.
1 5 4
Advertisement
Table of Contents
