Setting Of Bit Switch (Sssw); Bit Switch Composition - Canon Super G3 FAX Board-AP1 Service Manual

5
Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW01

Setting of Bit Switch (SSSW)

Bit Switch Composition

The registration/setup items of the switch are set according to the positions of its 8 bits; the
bit switch shown on the display is as follows, each bit being either 0 or 1:
Bit 7
SW01 0 0 0
Caution:
Do not change service data identified as "not used"; they are set as initial settings.
Sssw Menu Num Ncu Type
SW01 0 0 0
SW02
1 0 0
SW03 0 0 0
SW04
1 0 0
SW05 0 0 0
SW06
1 0 0
SW07 0 0 0
SW08
1 0 0
5 Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW01 Service Mode
Bit 0
0 0 0 0 0
F-5-9
Print Clear Test Report
IPFAX
<READY>
<1/7>
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
OK
F-5-10
■ SSSW-SW01
● Functional Construction
Bit Function
0 service error code
1 error dump list
2 not used
3 not used
4 not used
5 not used
6 not used
7 not used
Detailed Discussions of Bit 0
Selects whether or not service error codes are output.
When output is selected, service error codes are displayed and in reports.
Detailed Discussions of Bit 1
Selects whether or not error dump lists are output.
When selecting 'output', the error transmission report and the reception result report at the
time of error to which the error dump list is attached are output.
5-5
1 0
output not output
output not output
- -
- -
- -
- -
- -
- -
T-5-2
5-5