Table of Contents
Advertisement
Using the DRPD f unction
Setting up DRPD
r Turning on the DRPD software switches
Follow this procedure lo turn on the DRPD function
and set the answer mode for each ring pattern.
.The DRPD function operates only when the DRPD user
switch is set fo ON.
. lf you are not sure which ring pattern is used for your
telephone number, check the facsimile display the next
time a call comes in. The display will show you the ring
pattern.
When the user setting for DRPD is ON, for each ring
pattern you can register.
. The TEL, FAX, or FAVTEL AUTO SW mode.
. A user phone number.
. A user name.
Up to 20 digits for user phone or fax numbers, or 16
characlers for user names, can be entered for each of
the four patterns.
t Make sure that the REGISTMTION switch is ON before
you register. Turn it OFF after you complete registration.
1 Press tFTNdT-Toxt.
1 .
D I A I
S E T U P
2 Press @.
3 . u s E R s w
3 Press fs-rTl.
TX REPORT
4 Press the search keys (. ') to display DReD.
DRPD
5 Press fs-E-T-l.
The current setting is displayed.
O F F
6 Press the search keys (. ')to display oN.
ON
1 1 0
Advertisement
Table of Contents
