System Manager Settings
This section describes settings that the system manager can make, including how to set the Send
Start Speed, Receive Start Speed, Receive Mode, and Receive Password. It also describes how to
set, change, and delete settings for forwarding received fax documents, and how to enable or dis-
able certain settings.
Setting Up the Fax Functions (Fax Settings)
NOTE
• The factory settings are:
Send Start Speed:
Receive Start Speed:
Memory Lock:
Receive Password:
1
Call up the desired screen as follows:
Additional
key → [System Settings]
Functions
2
Enter the System Manager ID and System
Password, then press the
After pressing each key, use the numeric keys to
enter the information.
NOTE
• This step is not required if you are not using a
System Manager ID or System Password.
3
Press the [Communications Settings] key.
33600 bps
33600 bps
Off
None
key.
ID
System Manager Settings
4-7