Table of Contents
Advertisement
Using the memory
Sending a document from memory
Occasionally, the fax may fail to send a document from
the memory because of an error. Even after an error
the document remains in the memory, so you can send
it directly from the memory without scanning it again.
. Before you can print out a document stored in the
memory, you have to know its transaction number. lf you
don't know the transaction number, print out a memory
l i s t . ( . 9 8 )
When you re-send a document from the memory, you
can send it to the same destination with the previously
dialed number or to a new destination by dialing a new
number. Both methods are described below.
r Re-sending to the same destination
Follow this procedure to re-send a document to the
same destination from the memory after a transmission
error. ( + 141)
. ln order to use this feature, the software switch for
document transmission failure (DOCU. TX FAILURE) must
be sef to KEEP. lf this swtch is set to CLEAR, Vou cannot
use this feature.
Follow the procedure to enter the memory
mo d e . ( r 9 7 )
1 .
T X R E S R V . L I S T
Press @ or the search keys (. > )
the sixth selection.
to display
6 .
M E M . R E T R A N S M I T
3 Press ts-at.
rxlRx no.
9012
The number of the file already scanned into
the memory that you tried to send is
displayed.
The document transmission starts to the
other party you dialed before the error
occurred.
103
Advertisement
Table of Contents
