Removing a Card or Blank
CAUTION:
safety instructions in the
NOTICE:
Click the
functioning before you remove it from the computer. If you do not stop the card in
the configuration utility, you could lose data. Do not attempt to eject a card by
pulling its cable, if one is attached.
Press the latch and remove the card or blank. For some latches, you must press
the latch twice: once to pop the latch out, and then a second time to pop the
card out.
84
Using Cards
Before you begin any of the procedures in this section, follow the
Product Information Guide
icon in the taskbar to select a card and stop it from
.