Video And Display Problems - Dell D630 - LATITUDE ATG NOTEBOOK User Manual

2 Click Mouse.
3 Try adjusting the settings.
C
H E C K T H E M O U S E C A B L E
cable, check it for damage, and firmly reconnect the cable.
If you are using a mouse extension cable, disconnect it and connect the mouse
directly to the computer.
T
O V E R I F Y T H A T T H E P R O B L E M I S W I T H T H E M O U S E
1 Shut down the computer.
2 Disconnect the mouse.
3 Turn on the computer.
4 At the Windows desktop, use the touch pad to move the cursor around,
select an icon, and open it.
If the touch pad operates correctly, the mouse may be defective.
C
H E C K T H E S YS T E M S E T U P P R O G R A M S E T T I N G S
program lists the correct device for the pointing device option. (The computer
automatically recognizes a USB mouse without making any setting
adjustments.)
T
E S T T H E M O U S E C O N T R O L L E R
pointer movement) and the operation of the touch pad or mouse buttons, run
the Mouse test in the Pointing Devices test group in the Dell Diagnostics (see
"Dell Diagnostics" on page 101).
R
E I N S T A L L T H E T O U C H P A D D R I V E R
page 140.

Video and Display Problems

Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 198) as
you complete these checks.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Shut down the computer. Disconnect the mouse
—
To test the mouse controller (which affects
—
See "Reinstalling Drivers and Utilities" on
—
Product Information Guide
,
C H E C K T H E T O U C H P A D
Verify that the system setup
—
.
Troubleshooting
—
127