Hinge Cover - Dell D630 - LATITUDE ATG NOTEBOOK User Manual

Hinge Cover

CAUTION:
safety instructions in the
NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
Be careful when removing the hinge cover.
1 Follow the procedures in "Before You Begin" on page 149.
2 Turn the computer top-side up, and then open the display all the way (180
degrees) so that the display rests on your work surface.
NOTICE:
simultaneously. Removing the hinge cover in a different way than described may
cause the plastic to break.
1
hinge cover
3
indent
3 Starting on the right side of the computer, use a plastic scribe to pry up the
hinge cover. Lift the cover away from the computer going from the right
toward the left, and lay the cover aside.
4 To replace the hinge cover, insert the left edge of the cover into place.
152
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the
Product Information Guide
To avoid electrostatic discharge, ground yourself by using a wrist
The hinge cover is fragile and can be damaged if extreme force is used.
To avoid damaging the hinge cover, do not lift the cover on both sides
2
plastic scribe
.
1
2
3