Dell D630 - LATITUDE ATG NOTEBOOK User Manual page 159

4 If you are replacing a memory module, ground yourself and remove the
existing module:
Use your fingertips to carefully spread apart the securing clips on each
a
end of the memory module connector until the module pops up.
Remove the module from the connector.
b
1
1 securing clips (2 per connector)
5 Ground yourself and install the new memory module:
NOTE:
If the memory module is not installed properly, the computer may not boot
properly. No error message indicates this failure.
Align the notch in the module connector with the tab in the
a
connector slot.
Slide the module firmly into the slot at a 45-degree angle, and rotate
b
the module down until it clicks into place. If you do not feel the click,
remove the module and reinstall it.
2 memory module
Adding and Replacing Parts
2
159