1
1 securing clips (2 per connector)
NOTICE:
connector.
4 Ground yourself and install the new memory module:
NOTE:
If the memory module is not installed properly, the computer may not boot
properly. No error message indicates this failure.
Align the notch in the module edge connector with the tab in the
a
connector slot.
Slide the module firmly into the slot at a 45-degree angle, and rotate
b
the module down until it clicks into place. If you do not feel the click,
remove the module and reinstall it.
162
Adding and Replacing Parts
Insert memory modules at a 45-degree angle to avoid damaging the
2 memory module
2